|
●
사용방법
a) 캡을 벗기고
연기감지기의 홀을 향해 짧게 분사한다.
b) 정상적인 감지기의 경우 약 10초 ~ 15초이내에 동작상태를 알수 있다.
c) 감도가
둔한 감지기의 경우 짧게 한번 더 분사하고 20초 이상 기다려도 작동하지 않을 경우 감지기의 감도검사를 하여야 한다.
This product is UL Listed for testing a smoke detector's function per NFPA 72
and for use with smoke alarms listed to UL standards 217 and 268 when used as
follows : From a distance of 2 to 4 ft. (.6 - 1.2m) aim spray for 1-2 seconds at
the vents or side of the detector. When using this product in an enclosed
dispenser device only a 1/2-1 second spray is typically required to activate the
alarm. Alarm will sound within 1-10 seconds if the detector functions properly
unless the detector has a built-in delay circuit. Detector with delay circuits
should be sprayed 1 or 2 additional times to activate the alarm. When activated,
detector should alarm for 10 to 15 seconds Note : Excessive spraying at close
range may affect the detector's sensitivity
|
)
model